Cuscinetto flangiato 1/4''x3/8''
Schermature in metallo
Per uso in offroad/sporco rimuovere l'olio e lubrificare con grasso
Flanged Ball Bearing 1/4''x3/8''
To use on dirt remove oil and use grease
New aluminium front bodymount platefor LABF1-01 Formula.The part was designed to reinforce front wing and chassis section by sandwiching the wing mount in-between the plate and the chassis.This makes for more sturdy and durable in the event of a crash.
-screw M3x10SV : 1 pcs
-screw M4x20SV : 2 pcs
Fit on all Formula kit.
For the original one, you need to disassemble the whole set of front arm to change the camber setting. It is not user friendly at all. So, we aim at this advantage and re-design the new easy-out camber mount. You only unscrew two screws and two ball studs to change the camber plate. Then, install the screws and ball studs again to finish the camber changing. This camber mount set includes 1, 2 and 3 degree.
Serve ad alzare l'avantreno tipo F104 Tamiya per fare l'altezza corretta con le gomme in lattice; Perfetto per fare l'altezza con con le gomme Ride in lattice.
2,5mm thick carbon fiber spacer plate for the front of the F104 chassis. Lowers your ride height by 2.5mm. Place the spacer under the front lower arm set of your F104. Made in the Italy with 100% Carbon Fiber. These optional Works perfect togheter with Ride F1 Tires.